Care and Maintenance Products

Goodrich ShineMaster™ Prep (Part Number 74-451-179) removes dirt, grease, oil, silicone products and other contamination as well as residual ShineMaster™ before reapplication.

This is the first step in the de-icer care process.

Age Master® #1 is a rubber preservative that replenishes the emollients destroyed by ozone and protects against weather.

This is the second step in the de-icer care process.

• Apply 6 months after new de-icer is installed
• Reapply every 150 flight hours (twice yearly)
• One quart covers approximately 90 sq. ft (8.3 sq. m)
• For use on Neoprene de-icers only
• Allow for 24-hour dry time
• Refer to ATA 30-10-31, Section lll for instructions
• Part Number 74-451-127

Goodrich Shinemaster™ is the third step in your de-icer care process.

• Cosmetic coating that provides a high luster shine
• Clean de-icer with ShineMaster™ Prep before apply 2-3 light coats
• One pint covers approximately 200 sq. ft. (18.6 sw. m)
• Reapply as desired
• Refer to ATA 30-10-31, Section III for instructions
• Part Number 74-451-178

Goodrich Aerospace Cleaner™ can be used to clean any de-icer as needed without removing the existing surface coating and can be used to clean off dirt, grime and bugs from de-icers with or without ShineMaster™.

• Approved for use on all Collins Aerospace Goodrich de-icers
• Can be used on all water-safe materials
• Water-based formula is environmentally friendly
• Apply as needed – no surface stripping required
• Great for removing dirt, grime and bugs
• Refer to ATA 30-10-31, Section III for instructions
• Available in 2 oz., 32 oz. and 128 oz. (Part Number 74-451-238)

Goodrich SILVERboot™ Polish is the ideal solution to maintain Silver De-Icer surface.

• Reduces cosmetic imperfections and enhances silver appearance
• Apply 6 months after new de-icer is installed, then as needed
• For use on Silver Urethane de-icers only
• Refer to ATA 30-10-66, Section III for instructions
• Available in 16 oz. (Part Number 74-451-239-16)

Goodrich Aerospace Protectant™ is a cosmetic treatment that provides resistance to dust, soiling and staining.

• Approved for use on all Goodrich de-icers
• Near 100% prevention of UV caused slow fade
• Water-based formula is environmentally friendly
• Apply as needed — no surface stripping required
• Refer to ATA 30-10-31, Section III for instructions
• Available in 2 oz., 32 oz. and 128 oz. (Part Number 74-451-237)

Goodrich ICEX® II; lowers adhesion strength between ice and de-icer surface allowing ice to shed more easily.

• Approved for use on all Goodrich de-icers
• Silicone-based product
• Apply every 50 flight hours during ice season, or as desired
• One quart covers approximately 400 sq. ft. (37 sq. m)
• Refer to ATA 30-10-31, Section III for instructions
• Available in 16 oz. (Part Number 74-451-139) and 32 oz. (Part Number 74-451-136)

Collins has multiple edge sealer kits available depending on the color and surface ply material of your de-icer.

De-Icer Color / Material	Edge Sealer Kit P/N	Instructions ATA#
	Black - Neoprene
Black - Neoprene	A-56-B 74-451-P	30-10-31 sect III 30-10-60
	Black - Estane®
Black - Estane®	74-451-K 74-451-P	30-10-84 30-10-60
	Silver - Urethane
Silver - Urethane	74-451-AQ	30-10-94
	Silver - Estane®
Silver - Estane®	74-451-R	30-10-39

Collins Aerospace Goodrich FASTpatch kits are designed to make permanent patch repairs to Goodrich pneumatic de-icers that are within the repair guidelines. The kits include all materials needed to complete installation.

Multiple patch kits are available depending on the color of your de-icer.

De-Icer Color	FASTpatch Kit P/N	Instructions ATA#
	Black
Black	74-451-AA	30-10-25
	Silver
Silver	74-451-S-1	30-10-80

Goodrich pinhole repair kits are designed to repair small pinholes on Goodrich pneumatic de-icers. Repairs can be made on pinholes which do not exceed 1/16” in diameter.

Multiple patch kits are available depending on the color of your de-icer. See options below.

De-Icer Color	Pinhole Kit P/N	Instructions ATA#
	Black
Black	74-451-AE	30-10-50
	Silver
Silver	74-451-AP	30-10-99

Goodrich offers rollers, brushes and a hook knife to be used for installing Goodrich pneumatic de-icers and performing de-icer repairs. Click here for a complete list of installation tools and reference instruction manual ATA 30-10-31.

Part Number	Description	Instruction Manual
	74-451-45
74-451-45	Hook Knife	ATA 30-10-31
	74-451-73
74-451-73	1/8" Metal Stitcher Roller for Patch Installation	ATA 30-10-31
	74-451-74
74-451-74	2" x 2 ½ “ Rubber Roller for De-Icer Installation & Patch Application	ATA 30-10-31
	74-451-89
74-451-89	1/4” Steel Stitcher Roller for De-Icer Installation & Patch Application	ATA 30-10-31