United States (North America)
Collins Aerospace - Goodrich Corporation
De-Icing & Specialty Heating Products
1555 Corporate Woods Parkway
Uniontown, OH 44685-8799 USA
Phone: +1 330 374 3040
Fax: +1 330 374 2290
Collins Aerospace, through its Goodrich® brand, manufactures advanced pneumatic de-ice boots and system components that provide reliable ice protection for a wide range of aircraft, including regional, business, general aviation, and military platforms. Featuring innovations like FASTboot™ with pre-applied adhesive for quick installation and SILVERboot™ for maintaining premium aircraft appearance, these de-icers are optimized for performance and extensively tested for reliability. Goodrich also offers a complete ice protection system with a full suite of high-quality components such as controllers, valves, and pressure regulators.
FASTboot® Pneumatic De-Icers
Our FASTboot Pneumatic De-Icers take the guess work out of de-icer installation, saving you time and money and improving aircraft readiness. The pre-applied adhesive provides a smooth and consistent de-icer bond at a fraction of the time needed for application of standard de-icers. Simply add the primer to the clean leading edge surface and allow a five-minute dry time. Following the approved installation procedure, peel and stick the pneumatic de-icer to the leading edge of your aircraft.
Features
Documents
- Reduces installation time
- FASTboot De-Icers can be flown immediately
- De-Icers can be inflated two hours after installation
- Reduces hazardous waste through pre-applied adhesive
- Reduces risk through initial installation guarantee
Installation and maintenance products
- FASTboot primer 74-451-207
- Conductive Edge Sealer (see 30-10-31)
- Rubber Roller 74-451-74
- Metal Roller 74-451-89
- Pinhole and patch repair kits
- Goodrich Cosmetic Products
SILVERboot™ Pneumatic De-Icers
SILVERboot Pneumatic De-Icers are ideal for maintaining the aircraft’s premium appearance, with demonstrated success in icing conditions while maintaining the aircraft’s premium appearance.
Features
Documents
- Absorbs less heat on composite leading edges
- Fluid-resistant urethane material
- Improved resistance to cold cracking
Installation and maintenance products
- Silver Gap Filler Kit, 74-451-Q
- Silver Edge Sealer Kit, 74-451-AQ
- Silver FASTpatch® Repair Kit, 74-451-S-1
- Silver Surface Repair Kit, 74-451-S-2
- Silver Pinhole Repair Kit, 74-451-AP
- Goodrich SILVERboot™ Polish, 74-451-237-16
- Goodrich Aerospace Protectant, 74-451-237-32
- Goodrich Aerospace Cleaner, 74-451-238-32
Standard Pneumatic De-Icers
Collins Aerospace Goodrich pneumatic de-icers are extensively tested for high reliability and performance. We continuously work with OEMs on improvements and new innovations to help improve the safety of the flying community.
Features
Documents
Installation and maintenance products
- De-Icers specifically designed and tested for each aircraft from optimal ice shed performance and minimal intercycle ice
- Development of proprietary surface plies formulated for diester type fluids resistance, superior cold crack resistance and maximum protection against erosion and ozone
- Goodrich continuously works with the OEMs on improvements and new innovations to ensure the safety of the flying community
- Goodrich tests the production lots to ensure high quality, reliable de-icers to build a reputation of trust
- Goodrich De-Ice Boots for DHC-8-400 (Q400) - English (PDF)
- Goodrich GenIII De-Ice Boots for Bombardier Q400 - French (PDF)
- Goodrich Pneumatic De-Icers for LET L-410/420 - English (PDF)
- Goodrich Pneumatic De-Icers for LET L-410/420 - Czech (PDF)
- Goodrich Pneumatic De-Icers for LET L-410/420 - Russian (PDF)
- Understanding Pneumatic De-Icing White Paper (PDF)
- De-Ice Boot Maintenance 101 (PDF)
- Conductive edge sealer, Neoprene, A-56B or 74-451-P
- Conductive edge sealer, Estane® 74-451-K or 74-451-P
- Cement, 3M 1300L cement, Rubber Roller 74-451-74,
- Metal Roller 74-451-89, Cement Brush
- Pinhole and patch repair kits
- Goodrich Cosmetic Products
Comparison
| Goodrich FASTboot Pneumatic De-Icers | Goodrich SILVERboot Pneumatic De-Icers | Goodrich Standard De-Icers | |
| Installation Materials | Primer | [silverboot info] | Cement / solvent |
| Installation Labor | 2 coats primer / peel and stick | [silverboot info] | 2 coats adhesive / reactivate |
| Installation Time | 5 minute dry time for primer | [silverboot info] | 2 coats adhesive with 1 hour dry time between coats |
| Turn Time | 1 hour set time | [silverboot info] | 24-48 hour set time prior to de-ice inflation |
| Final Finish | Edge sealant | [silverboot info] | Edge sealant |
| Environmental Impact | Clean primer brush | [silverboot info] | Hazardous waste includes adhesive, solvents and rags |
System hardware
Collins is a complete ice protection system supplier, providing high reliability components including: controllers, pressure regulator / relievers, ejector flow control valves, flow control valves, water separators, check valves, isolation valves, and pressure switches.